| | |

Synthetics Sealing – Protection and Sealing

Use and Benefits: Global Prefer® Synthetics Sealing is a temporary alcohol-based coating based on chemical nanotechnology, which generates an easy-to-clean effect on synthetic surfaces (polyester, PMMA, PC). The rubbed-on material generates a thin coat on the surface, which reduces the adherence of dirt and foreign material and better rolls off water. Coated surfaces are particularly easy to clean.

• Temporary alcohol-based coating
• Generates an easy-to-clean effect
• Water and dirt resistant
• Easy- to-C clean after application

Preparation: Free the surface thoroughly from dirty, oily and greasy staining. We recommend Global Prefer® AZ Cleaning Agent. Rinse with plenty of water afterwards. The surface must be clean, dry and grease-free prior to coating. Test the application on an unobtrusive spot or sample surface.

Important: It is important not to touch the surface with your hands after cleaning. Start refinement immediately after cleaning. Do not manually or mechanically clean the surface for about 2 hours after refinement.

Application: Apply through furbishing, using the Global Prefer® AP Cloth TOP 1. Economically spray the material and distribute with circling movements on the clean surface. The applied quantity is approx. 10-25 ml per sqm.

The applied material needs about 15-30 minutes to dry. The easy-to-clean effect emerges approx. 30 minutes after furbishing. If humidity is high, allow for longer hardening time (up to a few hours).

(Global Prefer® AZ Cleaning Agent and Global Prefer® AP Cloth TOP 1 are items of our Accessory Line, available under General.)

Quality check: Water should generate drops but not an even coating. If the easy-to-clean effect weakens, refresh the application by following the procedure of first time treatment.

Important Note: Cleaning coated surfaces: As any kind of staining does not adhere to the surface, aggressive cleaning agents (extremely acidic or basic, abrasive milk) are not required. Clean the surface with a sponge and mild detergent (i.e. Global Prefer® AZ Cleaning Agent), when roll-off effect weakens. The coating still requires the regular cleaning of the surface.

Important: Keep out of reach of children!

Specifications:

Dilution:		None
Applied Quantity:		approx. 10-15 ml per sqm
Hardening/Drying:		15-30 minutes; completely hardened after approx. 6 hours
Processing Temperature:		+5°C till +25°C
Storage and Service Life:		See imprints on bottle and jerry cans. Store well locked in original trade unit; protect from direct sunlight and frost.
Storage Temperature:		+5°C till +25°C
Environmental Impact:		Do not use it below +5°C.
Packaging Sizes:		125 ml, 250 ml, 500 ml and 1000 ml bottles, 5 and 10 liter jerry cans; other sizes of trade unit on request

Artikelnummer	Produktbezeichnung	Gebindegröße	UVP (ohne MwSt.)	UVP (inkl. MwSt.)
1047	Kunststoff-Versiegelung	125 ml	on request	on request
1048	Kunststoff-Versiegelung	250 ml	on request	on request
1829	Kunststoff-Versiegelung	500 ml	on request	on request
1835	Kunststoff-Versiegelung	1000 ml	on request	on request
1049	Kunststoff-Versiegelung	5 Liter	on request	on request
1050	Kunststoff-Versiegelung	10 Liter	on request	on request

Productdatasheet