| | |

Glass+Ceramics Sealing – Protection and Refinement

Use and Benefits: Global Prefer® Glass+Ceramics Sealing is a highly effective nanotechnology-modified coating material for all glass and ceramic surfaces, such as mirrors, laundry tables, floor and wall tiles, ceramic non-absorbent surfaces, shower rooms made of glass and the like. It facilitates the removal of staining, finger prints, lime scale and soap residue. In addition, it generates an ultra thin water and oil resistant coat on the surface. The surface requires significantly less frequent cleaning and can be cleaned much easier and faster.


Preparation: Surfaces and adjoining parts must be dry and clean. Only clean with Global Prefer® "Super- AZ- First-rate- and Precision" Cleaning Agents (please refer to the respective technical product information).

Caution: Do not use cleaning agents featuring the following characteristics:

- "With Active Shine" /  "Active Protection"
- "De-mister effect: Prevents de-mister of glass"
- "Cleans and reduces new staining"

You may test the cleanliness of the subsurface by sprinkling water on it. The water should form an even coat but not drops. Forming drops clearly indicates existing staining by oily or silicone substances or residue of previous coatings.

Application: Coat the clean and dry surface in sections. Moisten the Global Prefer® AP Cloth TOP 1 with Global Prefer® Glass+Ceramics Sealing or economically spray on smaller surface sections and apply with circling movements. Use the Global Prefer® Cloth TOP 1 or Cloth Top 4 to furbish away haziness until the surface is completely clear.
Keep out of reach of children!

Cleaning of coated surfaces: Staining and lime stone do not strictly adhere to the coating; thus, aggressive cleaning agents (extremely acidic or basic, abrasive milk) are not required.
Clean the surface with a sponge and Global Prefer AZ Cleaning Agent, when the roll-off effect weakens. The coating requires regular, but significantly easier, cleaning of the surface.

Specifications:

Applied Quantity:		approx. 15-25 ml per sqm
Hardening/Drying:		Dried up after approx. 30 minutes, hardened after approx. 12 hours.
Processing Temperature:		+5°C till +25°C; Protect from direct sunlight.
Storage and Service Life:		See imprints on bottles and jerry cans; Store well locked in original trade unit; protect from direct sunlight and frost.
Storage Temperature:		+5°C till +25°C
Environmental Impact:		Do not use it below +5°C.
Packaging Sizes:		125 ml and 250 ml and 1000 ml spray flasks; other sizes of trade unit on request.

Artikelnummer	Produktbezeichnung	Gebindegröße	UVP (ohne MwSt.)	UVP (inkl. MwSt.)
1320	Glas+Keramik-Versiegelung	125 ml	on request	on request
1739	Glas+Keramik-Versiegelung	250 ml	on request	on request
1740	Glas+Keramik-Versiegelung	1000 ml	on request	on request

Productdatasheet