| | |

Synthetics Sealing – Protection and Sealing

Use and Benefits: Global Prefer® Synthetics Sealing is a temporary alcohol-based coating based on chemical nanotechnology, which generates an easy-to-clean effect on synthetic surfaces (polyester, PMMA, PC). The rubbed-on material generates a thin coat on the surface, which reduces the adherence of staining and foreign particles and better rolls off water. Coated surfaces are particularly easy to clean.

• Temporary alcohol-based coating
• Generates an easy-to-clean effect
• Water and dirt resistant
• Easy to clean after application

Preparation: Thoroughly free the surface from dirty, oily and greasy staining. We recommend Global Prefer® AZ Cleaning Agent. Rinse with plenty of water afterwards. The surface must be clean, dry and grease-free prior to coating. Test the application on an unobtrusive spot or sample surface.

Important: It is important not to touch the surface after cleaning. You should immediately start refinement after cleaning. Do not manually or mechanically clean the surfaces within 2 hours after refinement.

Application: Use the Global Prefer® AP Cloth TOP 1 to furbish material onto the surface. Economically spray and distribute with circling movements on the clean surface. The applied quantity is approx. 10-25 ml per sqm.

The applied material needs approx. 15 to 30 minutes to dry. The easy-to-clean effect emerges approx. 30 minutes after furbishing. If humidity is high, allow for longer drying (up to a few hours).

(Global Prefer® AZ Cleaning Agent and Global Prefer® AP Cloth TOP 1 are items of our Accessory Line and available under General.)

Quality Check: Water should form drops but not an even coat on the surface. When the easy-to-clean effect weakens, you may refresh the application by proceeding as during first time application.

Important note: Cleaning of the coated surface: Any kind of staining does not strictly adhere to the coating; thus, aggressive cleaning agents (extremely acidic or basic, abrasive mild) are not required. Clean the surface with a sponge and mild detergent (i.e. Global Prefer® AZ Cleaning Agent), when roll-off effect weakens. The coating still requires regular cleaning of the surface.

Important: Keep out of reach of children!

Specifications:

Dilution:		None
Applied Quantity:		approx. 10-15 ml per sqm
Hardening/Drying:		approx. 15-30 minutes; completely hardened after approx. 6 hours
Processing Temperatures:		+5°C till +25°C
Storage and Service Life:		See imprints on bottles and jerry cans. Store well locked in original trade unit; protect from direct sunlight and frost.
Storage Temperature:		+5°C till +25°C
Environmental Impact:		Do not use it below +5°C
Packaging Sizes:		125 ml, 250 ml, 500 ml and 1000 ml bottles, 5 and 10 liter jerry cans; other sizes of trade unit on request

Artikelnummer	Produktbezeichnung	Gebindegröße	UVP (ohne MwSt.)	UVP (inkl. MwSt.)
1047	Kunststoff-Versiegelung	125 ml	on request	on request
1048	Kunststoff-Versiegelung	250 ml	on request	on request
1829	Kunststoff-Versiegelung	500 ml	on request	on request
1835	Kunststoff-Versiegelung	1000 ml	on request	on request
1049	Kunststoff-Versiegelung	5 Liter	on request	on request
1050	Kunststoff-Versiegelung	10 Liter	on request	on request

Productdatasheet