| | |

De-mister Synthetics – Protection and Sealing

Use and Benefits: Global Prefer® De-mister Synthetics is a coating for synthetics with de-mister effect. Suitable for synthetic surfaces, such as shower rooms, acrylic, etc.

• Highly effective de-mister coating
• For shower rooms and synthetic surfaces
• Easy to clean after application

Preparation: Test the application on an unobtrusive spot or sample surface. The surface must be free from dirty, oily and greasy staining. We recommend Global Prefer® AZ Cleaning Agent. Rinse with plenty of water afterwards. The surface must be clean, dry and grease-free prior to coating.

Application: Spray a small amount of Global Prefer® De-mister Synthetics on the surface and furbish, using the Global Prefer® AP Cloth TOP1.

The coating will have dried up after a short time (about 1-2 minutes. If cords are visible after drying, you might have used too much of the product. Immediately repeating will remove the cords and result in a clear view.

Caution: We recommend the use of protective gloves during sealing, in order to avoid dehydration of skin. Keep out of reach of children.

Specifications:

Dilution:		None
Applied Quantity:		approx. 15-25 ml per sqm
Hardening/Drying:		approx. 1-2 minutes
Processing Temperature:		+5°C till +25°C; Protect from direct sunlight.
Storage and Service Life:		See bottle imprints. Protect from direct sunlight and frost; store well locked in original trade unit
Processing Temperature:		+5°C till +25°C
Environmental Impact:		Do not use it below +5°C.
Packaging Sizes:		50 ml, 125 ml, 250 ml spray flasks; other sizes of trade unit on request.

Artikelnummer	Produktbezeichnung	Gebindegröße	UVP (ohne MwSt.)	UVP (inkl. MwSt.)
1068	Antibeschlag Kunststoff	50 ml	on request	on request
1069	Antibeschlag Kunststoff	125 ml	on request	on request
1070	Antibeschlag Kunststoff	250 ml	on request	on request

Productdatasheet