Timber+Bricks Sealing – Protection and Refinement


Use and Benefits: Global Prefer® Timber+Bricks Sealing is a coating material based on nanotechnology-modified systems. Self-organizing, ultra thin anti adhesive components equip the surface with an invisible coating of hydrophobic and oil repellant characteristics. It minimizes the regeneration of algae and moss due to the lower water absorption of the subsurface. Global Prefer® Timber+Bricks Sealing may be used multi-purposely for open porous, absorbent subsurfaces, such as patio or staircase pavements made of stone, wooden railings, coverings, and wooden components that are exposed to the elements and not dimensionally stable.

• For open-porous, absorbent subsurfaces
• Water and oil repellent characteristics
• Minimizes adherence of staining
• Easy-to-clean after application


Preparation: The surface to be treated must be dry and clean. We recommend Global Prefer® AZ Cleaning Agent or Global Prefer® Super Cleaning Agent (on this, please see separate product information) for preliminary cleaning. In each case, test the compatibility on an unobtrusive spot.

Application: Apply Global Prefer® Timber+Bricks Sealing through spraying and rubbing by using the Global Prefer® Cloth Top 1, or apply lusciously by using brushes or paint-brushes. The applied quantity depends on the absorbency of the surface to be treated. Very porous or absorbent materials require a bigger amount than smooth, compact and fine pored surfaces.

Caution: The temperature of the surface and air during application should be between +5°C and max. +30°C. Do not apply on unprotected surfaces under conditions of heavy rain or wind.

Keep out of reach of children!



Specifications:

Dilution: None
Applied Quantity: 100-120 ml per sqm
Hardening/Drying: Dried up after approx. 4-6 hours;
Completely cured after 24 hours.
Processing Temperature: +5°C till +30°C
Protect from direct sunlight.
Storage and Service Life: See imprints on bottles and jerry cans.
Protect from direct sunlight and frost.
Storage Temperature: +5°C till +30°C
Environmental Impact: Do not use it below +5°C. Coat only smaller sections, if temperature is above +25°C.
Packaging Size: 250 ml, 500 ml and 1000 ml spray flasks, 5 and 10 liter jerry cans; other sizes of trade unit on request.

Artikelnummer Produktbezeichnung Gebindegröße UVP (ohne MwSt.) UVP (inkl. MwSt.)
1138 Holz+Stein-Versiegelung 250 ml on request on request
1139 Holz+Stein-Versiegelung 500 ml on request on request
1140 Holz+Stein-Versiegelung 1000 ml on request on request
1141 Holz+Stein-Versiegelung 5 Liter on request on request
1142 Holz+Stein-Versiegelung 10 Liter on request on request

Productdatasheet