Synthetic De-mister – Protection and Sealing


Use and Benefits: Global Prefer® Synthetic De-mister is a coating material for synthetics, which generates a de-mister effect. Appropriate for synthetic surfaces, i.e. shower rooms, acrylic, etc.

• Highly effective de-mister coating
• For shower rooms and acrylic surfaces
• Indoors and outdoors
• Easy-to-clean after application


Preparation: Test the application on an unobtrusive spot or a sample surface prior to coating. Free the surface thoroughly from dirt, oil and greasy staining. We recommend Global Prefer® AZ Cleaning Agent. Rinse with plenty of water afterwards. Surfaces must be clean, dry and grease-free prior to coating.

Application: Spray a small amount of Global Prefer® De-mister Synthetic on the surface and rub with the Global Prefer® AP Cloth TOP1. 

The coat will have dried up after a short time (approx. 1-2 minutes). If cords are visible after drying, you might have probably used too much of the product. Immediately repeat the procedure using less of the coating material, in order to remove the cords and to generate a clear coating.



Caution: We recommend the use of gloves in order to avoid dehydration of skin. Keep out of reach of children!


Specifications:

Dilution: None
Applied Quantity: Approx. 15-25 ml per sqm
Hardening/Drying: Approx. 1 to 2 minutes
Processing Temperature: +5°C till +25°C
Protect from direct sunlight.
Storage and Service Life: See bottle imprints.
Protect from direct sunlight and frost; keep well locked in original trade unit.
Storage Temperature: +5°C till +25°C
Environmental Impact: do not use it below +5°C
Packaging Size: 50 ml, 125 ml, 250 ml spray flasks; other sizes of trade unit on request.

Artikelnummer Produktbezeichnung Gebindegröße UVP (ohne MwSt.) UVP (inkl. MwSt.)
1068 Antibeschlag Kunststoff 50 ml on request on request
1069 Antibeschlag Kunststoff 125 ml on request on request
1070 Antibeschlag Kunststoff 250 ml on request on request

Productdatasheet