Leather Sealing – Maintenance and Protection for leather


Use and Benefits: Global Prefer® Leather Sealing is a diluted impregnation for leather intended for hydrophoby (water repellant) and olephoby (dirt resistant). Water exposure or staining on treated leather, i.e. coffee, drinks or fat, will be significantly reduced.

• Highly effective impregnation for leather
• Reduced water exposure and staining
• Easy-to-Clean after application



Preparation: The leather must be cleaned thoroughly prior to application in order to remove any supportive or finishing products (i.e. surfactants and lubricants). First test on an unobtrusive spot or sample surface.

Application: Shake well before use. Apply Global Prefer® Leather Sealing in such a way, that a thin and light wet coat is generated on the surface. Spray a bigger surface from a distance of approx. 25 cm; do not spray precisely. The leather might darken temporarily, depending on the application intensity.

Caution: Leather changes size when too much water is applied! Do not treat with a soaking bath! Keep out of reach of children!

Specifications:

Applied Quantity: 10-100 ml per sqm (depending on the kind of leather)
Hardening/Drying: At least 30 minutes at room temperature (or until material feels dry to the touch)
Processing Temperature: +5°C till +25°C
Protect from direct sunlight.
Storage and Service Life: See imprints on trade unit.
Keep well locked, in original trade unit only. Protect from direct sunlight, heat or overheat and frost.
Storage Temperature: +5°C till +25°C
Environmental Impact: Do not use it below +5°C.
Coat only smaller sections, when temperature is above +25°C.
Packaging Sizes: 250 ml, 500 ml and 1000 ml spray flasks; other sizes of trade unit on request

Artikelnummer Produktbezeichnung Gebindegröße UVP (ohne MwSt.) UVP (inkl. MwSt.)
1057 Leder-Versiegelung 250 ml on request on request
1058 Leder-Versiegelung 500 ml on request on request
1059 Leder-Versiegelung 1000 ml on request on request

Productdatasheet