Allmineral Sealing – Protection and Refinement
Use and Benefits: Global Prefer® Allmineral Sealing is a water-based, deeply immersive impregnation for absorbent, mineral surfaces. It is based on a nanotechnology-modified polymeric system. It protects the surface from water absorption and early staining by moss and algae. It is permeable to steam, is UV resistant, color/neutral and does not form a coat.
• For absorbent, mineral wall surfaces
• Water and dirt repellent
• UV resistant, permeable and color-neutral
Preparation: The subsurface must be clean, dry, stable and free from lose parts as well as from parting agents. Preliminarily clean dirty surfaces with a pressure washer or steam blasting equipment. Repair deficiencies in the construction (i.e. cracks) through appropriate measures up-front.
Application: Apply Global Prefer® Allmineral-Sealing using a paint brush or roller, or common spreaders or high-pressure equipment. Start application of material from bottom and conduct upwards, in order to avoid unsteadiness through running material. Fine pored, smooth surfaces absorb less material than open-pored surfaces. After about 5 minutes, apply a second impregnation on the first coating which is still wet, thereby using less material. Collect excessive material with a brush, if necessary. You may thereby further improve the effect. You may wash dirty surfaces after the refinement with cold running water and a soft brush. If the surface does not feature water resistant effects anymore, you may refine again as described above after a thorough cleaning.
Specifications:
| Applied Quantity: | approx. 100-150 ml per sqm (depending on subsurface and absorbency) | |
| Hardening/Drying: | between 0.5 and 3 hours, depending on weather conditions; completely hardened after approx. 24 hours. | |
| Processing Temperature: | +5°C till +25°C Only apply under dry weather conditions and without direct sunlight. |
|
| Storage and Service Life: | See imprints on bottles and jerry cans. Protect from frost and direct sunlight; do not use below +5°C. |
|
| Storage Temperature: | +5°C till +30°C | |
| Environmental Impact: | Do not use it below +5°C. | |
| Packaging Sizes: | 1000 ml spray flask; 5 and 10 liter jerry cans; other sizes of trade unit on request. |
| Artikelnummer | Produktbezeichnung | Gebindegröße | UVP (ohne MwSt.) | UVP (inkl. MwSt.) |
| 1135 | Allmineral-Versiegelung | 1000 ml | on request | on request |
| 1136 | Allmineral-Versiegelung | 5 Liter | on request | on request |
| 1137 | Allmineral-Versiegelung | 10 Liter | on request | on request |
Productdatasheet