Varnish Sealing A+B – Protection and Sealing
Use and Benefits: Global Prefer Varnish Sealing A+B is a mixture of 2 components based on chemical nanotechnology, with the help of which heavily exposed surfaces may achieve an excellent roll-off condition of diluted and oily liquids. The adherence of dirt, insects and foreign objects reduces; the varnish becomes more resistant against scratches and mechanical exposure. The coated surface is particularly easy to clean.
• Water and dirt resistant mixture of 2 components
• Varnish becomes more resistant against scratches
• Easy to clean after application
Important notes: Conduct the application under normal temperature and humidity conditions. Any rainfall or staining on the object to be cleaned or insufficient drying prior treatment might impede the bonding of the sealing. Do not apply the sealing on surfaces colder than +5°C or warmer than +30°C. Avoid direct sunlight during application.
Do not apply on automobiles manufactured before 1996 without prior suitability test (because of their paint structure)!
(Accessories such as Global Prefer AP Cloth TOP 1, Mixing Bottles and Global Prefer A-Z Cleaner are available in the Common and Cleaning section).
Preparation: Free the surface from dirty, oily and greasy staining. We recommend Global Prefer A-Z Cleaner. Rinse with plenty of water afterwards. The surface must be clean, dry and grease-free prior to coating.
Test the application on an unobtrusive spot or sample surface. We recommend the use of protective gloves, as Global Prefer Varnish Sealing A+B dehydrates the skin.
Do not touch the surface by hand after cleaning. Immediately begin refinement after cleaning process. Do not mechanically or chemically clean the surface for at least 2 hours after refinement.
Application: 1. Open one mixing bottle. Fill "Component A" followed by "Component B" into the mixing bottle and attach screw top.
2. Shake the mixing bottle with the mixed components swell for about 2 minutes prior to application. Unscrew top and attach the included spray gun top.
3. Evenly and economically spray on varnish surface and use the Global Prefer® AP Cloth TOP 1 to apply with circling movements and without force. Always treat surface sections of approx. 50x50 cm.
4. Furbish the surface with a clean AP Cloth TOP 1, until no more "mist" is visible. It is possible (i.e. with darker vehicles, if not sufficiently furbished), that clouding occurs on the paint. Lightly apply sealing again on those spots and furbish thoroughly.
Keep out of reach of children!
Specifications:
| Dilution: | None | |
| Applied Quantity: | Approx. 15-25 ml per sqm Approx. 200m prepared mixture for 1 vehicle (depending on size). |
|
| Hardening/Drying: | Dried up after about 60 minutes; completely hardened after 2-3 hours. | |
| Processing Temperature: | Do not use below +5°C and above +30°C. Protect from direct sunlight. |
|
| Storage and Service Life: | Single components approx. 12 months, mixed components max. 3days. Protect from direct sunlight and frost. |
|
| Storage Temperature: | +5°C till +30°C | |
| Environmental Impact: | Do not use it below +5°C. | |
| Packaging Sizes: | 125 ml and 250 ml bottle; other sizes of trade unit on request. Please order components A and B exclusively together. |
| Artikelnummer | Produktbezeichnung | Gebindegröße | UVP (ohne MwSt.) | UVP (inkl. MwSt.) |
| 1045 | Varnish Sealing A / Lack-Versiegelung A (erste Komponente) | 125 ml | on request | on request |
| 1656 | Varnish Sealing B / Lack-Versiegelung B (zweite Komponente) | 125 ml | on request | on request |
| 1046 | Varnisch Sealing A / Lack-Versiegelung A (erste Komponente) | 250 ml | on request | on request |
| 1657 | Varnish Sealing B / Lack-Versiegelung B (zweite Komponente) | 250 ml | on request | on request |
| 1862 | Mixing Bottle / Mischflasche | 125 ml | on request | on request |
| 1863 | Mixing Bottle / Mischflasche | 250 ml | on request | on request |
| 2016 | Mixing Bottle / Mischflasche | 500 ml | on request | on request |
Productdatasheet