Car Glass Sealing – Protection and Sealing


Use and Benefits: Global Prefer Car Glass Sealing is a highly effective coating material for any vehicle surfaces made of glass. It facilitates the removing of dirt, insects and icing. The coating will be improved significantly, the windscreen washer system used more infrequently.
The refinement generates an ultra thin coat, which is not visible on the surface.

• Highly efficient refinement
• Application on all vehicle surfaces made of glass
• Water and oil repellant features


Preparation: Glass surfaces and all adjoining components, such as window seals, synthetic and car body part, must be entirely dry and clean. A preliminary cleaning with Global Prefer Top Cleaner Abrasive is necessary, in order to achieve best results.

Apply Global Prefer Top Cleaner Abrasive in accordance with the application recommendations, and clean subsurface with a sponge (Global Prefer Grey Giant) and water. Cleaning afterwards with Global Prefer PreClean will result in a residue-free surface, which will significantly advance the durability of Global Prefer Car Glass Refinement.

(Global Prefer Application Cloth TOP 1, Global Prefer Top Cleaner Abrasive and Global Prefer Grey Giant are available under the General section).



Application: Spray Global Prefer Car Glass Sealing on 30x30 cm sections and quickly furbish with circling movements using the Global Prefer Application Cloth TOP 1. Allow overlapping sections in order to avoid bad spots. You may remove grey films (excess of material) by evenly furbishing with the Global Prefer Application Cloth TOP 1. After furbishing, the glass surface will look brilliant and clear.

Caution: In order to avoid dehydration of skin, we recommend the use of protective gloves during refinement.

Environmental Impact: Solvents volatilize faster under conditions of high humidity, direct sunlight and temperatures above 20 °C. Treat smaller surface sections only.

Result: Test the proper application by pouring water on the surface. Water drops should form, but not an even coat, then the refinement will have been properly.

Cleaning the coated surface: Clean with Global Prefer Grey Giant and Global Prefer Top Cleaner Abrasive, when roll-off effect weakens. Afterwards, repeat refinement as described above.

Specifications

Applied Quantity: Approx. 25 ml per sqm
Hardening/Drying: At least 1 hour; refinement will have completely hardened after 24 hours.
Processing Temperature: +5°C till +30°C
Protect from direct sunlight and frost.
Storage and Service Life: 12 months;
Store hermetically sealed in original trade unit; protect from direct sunlight and frost.
Storage Temperature: +5°C till +30°C
Packaging Sizes: 125 ml pump spray, 250 ml spray gun; other sizes of trade unit on request

Artikelnummer Produktbezeichnung Gebindegröße UVP (netto) UVP (brutto)
1051 Car Glass Sealing / Autoglas-Versiegelung 125 ml on request on request
1052 Car Glass Sealing / Autoglas-Versiegelung 250 ml on request on request

Productdatasheet