AntiFog Plastic – Protection and Sealing
Use and Benefits: Global Prefer AntiFog Plastic is a coating material for synthetics with anti fog effect. Suitable for surfaces of synthetics such as helmet visors, acrylic, etc.
- Highly effective AntiFog coating
- For helmet visors and surfaces of synthetics
- Easy-to-clean after application
Preparation: Test the application on an unobtrusive spot or a sample surface. Thoroughly free the surface from dirty, oily and greasy staining. We recommend Global Prefer A-Z Cleaner. The surface must be clean, dry and grease-free prior coating.
Application: Spray a small amount of Global Prefer AntiFog Plastic on the surface and furbish with the Global Prefer AP Cloth TOP1.
The coat will have dried up after a short time (approx. 1-2 minutes). If you notice cords after drying, you might have used too much of the product. Immediately repeating the coating with less coating material will remove the cords and allow for a clear view.
Caution: In order to avoid dehydration of skin, we recommend the use of protective gloves during sealing. Keep out of reach of children.
Specifications:
| Dilution: | None | |
| Applied Quantity: | Approx. 15-25 ml per sqm | |
| Hardening/Drying: | Approx. 1-2 minutes | |
| Processing Temperature: | +5°C till +25°C Protect from direct sunlight. |
|
| Storage and Service Life: | See bottle imprint; Protect from direct sunlight; store well locked in original trade unit. |
|
| Storage Temperature: | +5°C till +25°C | |
| Environmental Impact: | Do not use below +5°C. | |
| Packaging Sizes: | 50ml, 125 ml and 250 ml pump spray; other sizes of trade unit on request |
| Artikelnummer | Produktbezeichnung | Gebindegröße | UVP (ohne MwSt.) | UVP (inkl. MwSt.) |
| 1068 | AntiFog Plastic / Antibeschlag Kunststoff | 50 ml | on request | on request |
| 1069 | AntiFog Plastic / Antibeschlag Kunststoff | 125 ml | on request | on request |
| 1070 | AntiFog Plastic / Antibeschlag Kunststoff | 250 ml | on request | on request |
Productdatasheet